5% DE DESCUENTO POR DEJAR TU RESEÑA

DENALI Electronics

DENALI Cansmart™ Controller GEN II for KTM 890 & New 1290 Series

Controller for managing motorcycle lighting and power accessories.

$ 9,244.00 MXN

SKU DNL.WHS.21700

Availability by store

CDMXAVAILABLE
GDLSOLD OUT
ONLINEAVAILABLE

Shipping is calculated at checkout.

ASK US ON WHATSAPP ↗︎

Shipping and delivery times

Express shipping: estimated delivery in 1 to 3 business days after dispatch.

Ground shipping: estimated delivery in 3 to 5 business days after dispatch.

Orders are usually prepared in 1 to 2 business days. Available shipping options, costs and promotions are calculated at checkout based on destination, weight and order total.

Free shipping within Mexico is available on orders of at least $3,190 MXN. Availability and the final rate are confirmed at checkout based on your postal code and the weight of your order.

Store pickup

Select Store pickup at checkout. Wait for confirmation that your order is ready before coming to the store.

CDMX
C. Dr. José María Vértiz 1174, Ciudad de México. View store

GDL
Av. Patria 2945, Colli Urbano, 45070 Zapopan, Jalisco. View map

The availability shown is for the selected variant and may change while you complete your purchase.

Exchanges and returns

You have 7 calendar days after delivery to request an exchange or return.

The product must retain its tags, accessories and packaging and be in suitable condition. Shipping costs and the outcome depend on the type of request.

Have your order number ready and contact us on WhatsApp or at 55 8717 6041.

Read the full exchanges and returns policy.

PRODUCT DETAILS

Take advantage of the flexibility and intelligence of your KTM's CAN bus electrical system to dramatically simplify accessory installation with the new and improved DENALI CANsmart™ GEN II controller.

Description

The DENALI CANsmart™ controller offers plug-and-play installation and integrated control of up to four accessories, enabling dozens of customizable configurations that can be directly controlled from your KTM switch bank or the CANsmart™ accessory management software.

The four circuits of CANsmart are pre-programmed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our auxiliary B6 brake light.

Gen II: more features, more power, more versatility.

Unlike the Gen I CANsmart, the four circuits in the Gen II can provide a full 10 amps of continuous power, and each circuit can be configured to run any type of accessory. The maximum power consumption for the entire unit remains at 30 amps continuous. The Gen II also features two new auxiliary light configurations. You can now modulate the auxiliary lights for increased visibility, and configure the left and right side lights to independently turn off when the corresponding turn signal is activated.

*Limitations of the KTM 890

Due to variations in the wiring harness of the KTM 890, the following limitations apply:

If it's important for you to adjust the auxiliary lighting on the go, we recommend using our DialDim lighting controller, which allows for dimming and on-the-go control of up to two sets of auxiliary lights. Please note that both products can be installed together on your 890, so a logical setup would be two sets of auxiliary lights on a DialDim, while your horn, brake lights, daytime running lights (DRL), or other accessories can be powered from the CANsmart system.

Features
  • High/low synchronization: configure auxiliary lights to switch between programmable high/low settings using the factory high-beam switch.
  • On/Off and dimming*: independently switch two light sets ON/OFF and change their brightness (for both day and night) directly from your vehicle's original switches.
  • Modulate lights: configure auxiliary lights to modulate and increase your visibility to other motorists.
  • Flash to Pass - Need to get someone's attention? Press the high-beam switch three times and the auxiliary lights will flash three times faster.
  • Cancel with turn signal*: switches off the corresponding auxiliary light when the turn signal is activated, preventing powerful auxiliary lights from overpowering your signal.
  • Inverse flashing with hazard lights*: flashes auxiliary lights alternately with the hazard lights, increasing visibility during roadside emergencies.
  • Plug & Play horn installation: quickly and easily connect high-power aftermarket horns such as our SoundBomb™ without adding an extra harness or relay.
  • Delayed timeout: accessories on this circuit can be configured to remain powered for up to 30 seconds after switching off the motorcycle.
  • Onboard power: the "accessory" circuit option is ideal for powering your GPS, phone, heated gear, or any other electronic device.
  • Strobe with horn: when selected, CANsmart™ software automatically activates the auxiliary lights when you sound the horn. This works with either the factory horn or a SoundBomb™ horn.
  • Deceleration-activated "Smart Brake" technology: CANsmart™ reads vehicle speed in real time to activate the auxiliary brake light during deceleration before you touch the brake. You can adjust the sensitivity and minimum speed at which Smart Brake activates.
  • Brake flash patterns: CANsmart™ provides four different flash patterns that make our super-bright auxiliary brake lights even more noticeable to motorists behind you. Configure the auxiliary brake lights to flash only during hard braking, flash continuously while braking, or flash rapidly four times and then remain steady (California-legal flash rate).
  • Circuit function selector: the CANsmart software circuit function selector lets you run any accessory on any of the four circuits. Click a circuit icon to open the dropdown and select from the available circuit functions.
  • Switched power supply: CANsmart™ provides a universal "accessory" option that supplies clean switched 12 V power. Any accessory connected to this circuit turns on and off with the ignition.
  • All KTM 890 models (2020-Present)
  • All KTM 1290 models (2021-Present)
  • Dimming and on/off functions for auxiliary lights one and two are not available through the motorcycle's factory controls (all dimming and light settings must be configured in CANsmart accessory manager software)
  • Turn signal circuit function not available.
  • Auxiliary light cancellation with turn signal function not available.
  • Flashing auxiliary lights as turn signals not available.
  • The auxiliary brake light activates only with the front brake lever
  • KTM Dongle function not available
What's included
  • CANsmart™ controller
  • (x2) 5.5-foot light extension cables
  • 5-foot SoundBomb horn extension cable
  • Horn trigger wire
  • B6 brake light wiring adapter
  • Cable ties
  • Adhesive hook-and-loop fastener
  • Micro USB programming cable
Denali Electronics — material oficial de la marca

DENALI Electronics

VIEW ALL ↗︎
DENALI Cansmart™ Controller GEN II for KTM 890 & New 1290 Series

CUSTOMER REVIEWS

REVIEWS

There are no reviews for this product yet.

Your selection

VIEW CART ↗︎

6 MSI en cascos TORC

Elige tu casco TORC para comprarlo en tienda física o solicitar tu link de pago por WhatsApp. Esta promoción no está disponible para compras en línea.

Ver cascos TORC